MV XLPE INSULATION UNARMORED POWER CABLE

Our company specialized in Cable/Electrical Wire/ Conductor product

MV XLPE INSULATION UNARMORED POWER CABLE

type:CU OR AL/XLPE/SCR/PVC

standard:IEC 60502-2

construction:CU or AL/XLPE/SCR/PVC

rating voltage:3.8/6.6~19/33kV

conductor material:CU or AL

insulation material:XLPE

shield construction:Copper tape or Copper wire

sheath material:PVC

specification or package can be produced as your request.

INQUIRY

Application:
XLPE INSULATED LAID UP AND PVC SHEATHED CABLE TO IEC60502.2.
is used indoor or outdoor, in tunnel, cable furrow or pipe, to be laid underground,
be applicable to the well, water inside and fall in the bad soil.
Standards:
IEC 60502-2
CONDUCTOR:
The conductor consists of annealed copper or aluminum wires(usually solid conductor of class1, stranded conductor of class 2,
including non-compacted and compacted methods as well as flexible conductor of class 5 according to IEC60228).
The conductor appearance is smooth without any stain, oxidation or mechanical damage.
Conductor Screen:
The conductor screen consists of an extruded semi-conducting polyethylene to minimize electrical stresses due to the stranded configuration of the conductor.
The semi-conducting material used for conductor screen has no deleterious effect on the conductor. Semiconducting tape is sometimes applied as a separator.
INSULATION:
The insulation material is extruded cross-linked polyethylene. The conductor screen, the insulation and the insulation screen mentioned to the following
clause are extruded simultaneously in one process to ensure that the screen and insulation are intimately bonded together and free from all possibilities
of voids between layers. The extrusion process is carried out under strictly controlled atmospheric conditions. The thickness of the insulation layer is
the maximum value figured out from the design of the impulse voltage and A.C. voltage. ? The conventional cross-linking process by saturated steam has
frequently caused deterioration of the electrical characteristics of the insulation as treeing phenomena arose when put to use for long time. But the new
process by N2 gas has enabled to protect the electrical characteristics from being deteriorated and to lessen the thickness of the insulation and accordingly
the cable’s outer diameter itself.
Insulation Screen:
The insulation screen is provided over the insulation by extruding the semiconducting compound concentrically and circularly to minimize the possibility of
ionization on the outer surface of the dielectric.
SHEATH:
To protect the metallic sheath from electrical or chemical corrosion, it is covered by PVC (ST2), PE (ST7) or halogen free (ST8) sheath. The outer sheath is
normally black but a color other than black may be provided by agreement between the manufacturer and the purchaser, subject to its suitability for the particular
conditions under which the cable is to be used.
Color:
Black or as client required.
Core Identification:
Multiple conductors shall be identified by color or numbering with a suitable method. The color code may be changed in any contract.
For 3.6/6kV ~ 18/30kV ? Three core : Yellow, Green and Red colored tape applied between insulation screen and metallic screen.

3.8/6.6kV CU/XLPE/CTS/PVC 1C POWER CABLE?

Nominal Area of Conductor Maximum Conductor Resistance at 20 ℃ Thickness of XLPE Insulation Thickness of Copper Tape Appro. Overall Diameter Appro. Cable Weight Standard Packing Length Drum Size Appro. Gross Weight
Sqmm Ohm/Km mm mm mm kg/km Metre±10% KG
35 0.524 2.5 0.12 19.48 647 500 D-12 424
50 0.387 2.5 0.12 20.58 782 500 D-12 491
70 0.268 2.5 0.12 22.28 1009 500 D-12 605
95 0.193 2.5 0.12 24.08 1282 500 D-14 741
120 0.153 2.5 0.12 25.48 1535 500 D-14 868
150 0.124 2.5 0.12 26.88 1809 500 D-14 1005
185 0.0991 2.5 0.12 28.68 2190 500 D-16 1195
240 0.0754 2.6 0.12 31.28 2748 500 D-18 1474
300 0.0601 2.8 0.12 33.98 3373 500 D-18 1787
400 0.047 3 0.12 37.68 4264 500 D-18 2232
500 0.0366 3.2 0.12 41.52 5342 500 D-19 2771
630 0.0283 3.2 0.12 45.52 6743 500 D-21 3472

3.8/6.6kV CU/XLPE/CTS/PVC 3C POWER CABLE?

Nominal Area of Conductor Maximum Conductor Resistance at 20 ℃ Thickness of XLPE Insulation Thickness of Copper Tape Appro. Overall Diameter Appro. Cable Weight Standard Packing Length Drum Size Appro. Gross Weight
Sqmm Ohm/Km mm mm mm kg/km Metre±10% KG
35 0.524 2.5 0.06 37.66 1914 500 D-12 1057
50 0.387 2.5 0.06 40.0316 2328 500 D-12 1264
70 0.268 2.5 0.06 44.0968 3065 500 D-12 1633
95 0.193 2.5 0.06 48.1776 3931 500 D-14 2066
120 0.153 2.5 0.06 52.2584 4801 500 D-22 2501
150 0.124 2.5 0.06 54.6144 5606 500 D-22 2903
185 0.0991 2.5 0.06 58.264 6771 300 D-22 2131
240 0.0754 2.6 0.06 64.1496 8546 300 D-22 2664
300 0.0601 2.8 0.06 70.0596 10514 300 D-22 3254
400 0.047 3 0.06 77.7744 13284 250 D-22 3421
500 0.0366 3.2 0.06 86.73968 16754 250 D-22 4289
630 0.0283 3.2 0.06 95.53248 21171 200 D-22 4334

6.35/11kV CU/XLPE/CTS/PVC 1C POWER CABLE?

Nominal Area of Conductor Maximum Conductor Resistance at 20 ℃ Thickness of XLPE Insulation Thickness of Copper Tape Appro. Overall Diameter Appro. Cable Weight Standard Packing Length Drum Size Appro. Gross Weight
Sqmm Ohm/Km mm mm mm kg/km Metre±10% KG
35 0.524 3.4 0.12 21.28 711 500 D-12 456
50 0.387 3.4 0.12 22.38 849 500 D-12 525
70 0.268 3.4 0.12 24.08 1080 500 D-12 640
95 0.193 3.4 0.12 25.88 1359 500 D-14 780
120 0.153 3.4 0.12 27.28 1615 500 D-14 908
150 0.124 3.4 0.12 28.88 1906 500 D-14 1053
185 0.0991 3.4 0.12 30.48 2279 500 D-16 1240
240 0.0754 3.4 0.12 32.88 2834 500 D-18 1517
300 0.0601 3.4 0.12 35.38 3457 500 D-18 1829
400 0.047 3.4 0.12 38.48 4313 500 D-18 2257
500 0.0366 3.4 0.12 41.92 5369 500 D-19 2785
630 0.0283 3.4 0.12 45.92 6772 500 D-21 3486

6.35/11kV CU/XLPE/CTS/PVC 3C POWER CABLE?

Nominal Area of Conductor Maximum Conductor Resistance at 20?℃ Thickness of XLPE Insulation Thickness of Copper Tape Appro. Overall Diameter Appro. Cable Weight Standard Packing Length Drum Size Appro. Gross Weight
Sqmm Ohm/Km mm mm mm kg/km Metre±10%   KG
35 0.524 3.4 0.06 41.74 2137 500 D-16 1169
50 0.387 3.4 0.06 44.31 2582 500 D-17 1391
70 0.268 3.4 0.06 48.18 3320 500 D-22 1760
95 0.193 3.4 0.06 52.26 4206 500 D-23 2203
120 0.153 3.4 0.06 56.54 5123 500 D-24 2662
150 0.124 3.4 0.06 58.9 5940 500 D-25 3070
185 0.0991 3.4 0.06 62.54 7125 500 D-26 3663
240 0.0754 3.4 0.06 68 8896 300 D-27 2769
300 0.0601 3.4 0.06 72.85 10779 300 D-28 3334
400 0.047 3.4 0.06 79.5 13454 300 D-29 4136
500 0.0366 3.4 0.06 87.6 16847 200 D-30 3469
630 0.0283 3.4 0.06 96.39 21274 200 D-31 4355

12.7/22kV CU/XLPE/CTS/PVC 1C POWER CABLE?

Nominal Area of Conductor Maximum Conductor Resistance at 20 ℃ Thickness of XLPE Insulation Thickness of Copper Tape Thickness? of Outer Sheath Appro. Overall Diameter Appro. Cable Weight Standard Packing Length Drum Size Appro. Gross Weight
Sqmm Ohm/Km mm mm mm mm kg/km Metre±10% KG
35 0.524 5.5 0.075 1.8 25.7 920 500 D-12 570
50 0.387 5.5 0.075 1.8 26.8 1070 500 D-12 645
70 0.268 5.5 0.075 1.8 28.4 1310 500 D-12 765
95 0.193 5.5 0.075 1.9 30.5 1630 500 D-14 965
120 0.153 5.5 0.075 1.9 32 1900 500 D-14 1100
150 0.124 5.5 0.075 2 33.6 2240 500 D-16 1330
185 0.0991 5.5 0.075 2 35.2 2600 500 D-18 1450
240 0.0754 5.5 0.075 2.1 37.9 3200 500 D-18 1780
300 0.0601 5.5 0.075 2.2 40.1 3850 500 D-18 2090
400 0.047 5.5 0.075 2.3 43.2 4770 500 D-18 2630
500 0.0366 5.5 0.075 2.4 46.4 5830 500 D-19 3240
630 0.0283 5.5 0.075 2.5 50.4 7220 500 D-19 3930

 

12.7/22kV CU/XLPE/CTS/PVC 3C POWER CABLE?

Nominal Area of Conductor Maximum Conductor Resistance at 20 ℃ Thickness of XLPE Insulation Thickness of Copper Tape Thickness? of Outer Sheath Appro. Overall Diameter Appro. Cable Weight Standard Packing Length Drum Size Appro. Gross Weight
Sqmm Ohm/Km mm mm mm mm kg/km Metre±10% KG
35 0.524 5.5 0.075 2.6 53.9 3100 500 D-19 1870
50 0.387 5.5 0.075 2.7 56.5 3610 500 D-21 2130
70 0.268 5.5 0.075 2.8 60.1 4410 500 D-22 2630
95 0.193 5.5 0.075 2.9 64.4 5400 500 D-23 3170
120 0.153 5.5 0.075 3 67.9 6300 500 D-23 3650
150 0.124 5.5 0.075 3.1 71.1 7320 500 D-23 4160
185 0.0991 5.5 0.075 3.3 75 8540 500 D-23 4770
240 0.0754 5.5 0.075 3.4 80.6 10440 250 D-23 3110
300 0.0601 5.5 0.075 3.6 85.3 12450 250 D-23 3610
400 0.047 5.5 0.075 3.8 91.9 15370 250 D-23 3570

19/33kV CU/XLPE/CTS/PVC 1C POWER CABLE?

Nominal Area of Conductor Maximum Conductor Resistance at 20 ℃ Thickness of XLPE Insulation Thickness of Copper Tape Appro. Overall Diameter Appro. Cable Weight Standard Packing Length Drum Size Appro. Gross Weight
Sqmm Ohm/Km mm mm mm kg/km Metre±10% KG
35 0.524 8 0.12 30.68 1127 500 D-22 664
50 0.387 8 0.12 31.98 1295 500 D-23 748
70 0.268 8 0.12 33.68 1551 500 D-24 876
95 0.193 8 0.12 35.68 1871 500 D-25 1036
120 0.153 8 0.12 37.28 2166 500 D-26 1183
150 0.124 8 0.12 38.68 2464 500 D-27 1332
185 0.0991 8 0.12 40.48 2880 500 D-28 1540
240 0.0754 8 0.12 42.68 3453 500 D-29 1827
300 0.0601 8 0.12 45.18 4115 500 D-30 2158
400 0.047 8 0.12 48.28 5019 500 D-31 2610
500 0.0366 8 0.12 51.72 6127 500 D-32 3164
630 0.0283 8 0.12 55.92 7616 500 D-33 3908

19/33kV CU/XLPE/CTS/PVC 3C POWER CABLE?

Nominal Area of Conductor Maximum Conductor Resistance at 20 ℃ Thickness of XLPE Insulation Thickness of Copper Tape Appro. Overall Diameter Appro. Cable Weight Standard Packing Length Drum Size Appro. Gross Weight
Sqmm Ohm/Km mm mm mm kg/km Metre±10% KG
35 0.524 8 0.12 62.98 3646 300 D-22 1194
50 0.387 8 0.12 65.55 4160 300 D-22 1348
70 0.268 8 0.12 69.41 4997 300 D-22 1599
95 0.193 8 0.12 73.49 5990 300 D-22 1897
120 0.153 8 0.12 77.77 7026 300 D-22 2208
150 0.124 8 0.12 80.13 7904 300 D-22 2471
185 0.0991 8 0.12 83.78 9184 300 D-22 2855
240 0.0754 8 0.12 89.23 11103 300 D-22 3431
300 0.0601 8 0.12 94.08 13109 300 D-22 4033
400 0.047 8 0.12 100.73 15959 300 D-22 4888
500 0.0366 8 0.12 108.84 19570 300 D-22 5971
630 0.0283 8 0.12 117.63 24229 300 D-22 7369

Our Services:

1.Sufficient support for our tendering representatives.
2.OEM service available based on official & legal authorization.
3.Strict quality control system.
4.Faster lead time than our competitors.
5.Excellent quality with reasonable price.
6.Strong technical support (technical data, drawing, etc.)
7.Cable solutions to your particular requirements.
8.Free sample is available with economic express fee.
9.12 months quality guarantee after delivery.

INQUIRY

COPYRIGHT ? 2017 Henan Province Xinchang Copper Co.,Ltd.

亚洲日韩色图网